The emergence of foaming machine has brought a lot of business opportunities for all walks of life, and also brought a lot of opportunities for everyone. Foaming machine is also known as "foaming machine". With the continuous progress of modern technology, the technical content of foaming machine is also constantly improving, new models are constantly emerging, thus forming a variety of different technical systems. Around the 1970s, a special foaming machine appeared, that is, high-speed impeller foaming machine. After that, technologies like this will continue to upgrade and replace. Now it has developed into the third generation model with high-pressure inflation as the main body, and it can basically meet any demand. So what aspects should we consider when choosing foaming machine?

1. Fully understand the type of foaming machine

Although the basic principle of foaming machine is to introduce gas into foaming agent aqueous solution, different types of foaming machine introduce gas in different ways. It is very helpful for the producer to know the characteristics of the blowing machine and the type of blowing machine. For example, low speed agitating type slow rotating blades introduce gas into it, resulting in less bubble output and low foaming efficiency. High speed impeller is introduced into the air with high speed rotary impeller, and the bubble diameter can not be controlled, and the foam is uneven.

After understanding the advantages and disadvantages of various types of foaming machines, it is easy to choose foaming machines. Therefore, it is very important for producers to correctly select foaming machines to fully understand the types of foaming machines.

2. Master the basic technical parameters of foaming machine

For producers, it is not enough to understand the model and foaming principle only, but also need to further understand several important technical parameters of foaming machine to determine whether it meets the production requirements.

(1) output: output is the amount of foam generated, which must be slightly higher than 20% of the amount of foam needed to make room. The amount of bubbles generated should be the basis for ratification, rather than the upper limit.

(2) Installed capacity: the installed capacity is the total installed power, which is of great significance to the adaptability of the calculation circuit to the total power consumption.

(3) Equipment size: this parameter is a necessary factor for the overall layout planning of the workshop.

(4) Bubble diameter range: generally, the bubble diameter should be compared according to the requirements of specific products.

3. Carefully understand foaming quality

The final product of foaming machine is the foam, so in the production process, we also need foam, so the quality of the foam is the only criterion to judge the foaming machine. Judging the foaming quality of foaming machine should be based on three aspects, that is, the fineness of foam and the uniformity of foam and the amount of foam exudation. As long as these three aspects are qualified, then the foaming performance of foaming machine is better.